Experts in rheology, polymers and additives.

Our Surface Technology business unit aspires to be a reliable and expert partner for producers of adhesives and sealants, paints and varnishes, printing inks, as well as construction chemical products.

We stand for comprehensive expertise in raw materials for the specified fields of application, supported by our advanced laboratories, which enable us to develop continuously new products and applications, as well as to ensure adequate technical support to our partners . As we are both an independent distributor and an experienced producer, we are able to generate synergies which we deploy to react flexibly to customer wishes.

Adhesives, Sealings and Putties

LUVOTIX® - Organic rheology additives for solvent-based and solvent-free systems

LUVOTIX® rheology additives are fine, micronized waxes that are mainly made from renewable raw materials. The powders are based on castor oil derivatives, fatty acid amides and polyolefins.
Depending on the polarity of the formulation, the additives are incorporated directly in powdered form in a time- and temperature-controlled dispersion process. In addition to the standard types that have been tested and proven for many years, rheology additives that are particularly easy to activate are also available. The latter develop their full effectiveness after dispersion under shear even at lower temperatures.

ProductsDescriptionApplication
LUVOTIX® RCastor oil derivativeLUVOTIX® R controls the rheology properties of low to medium polar liquid organic systems. It is used as a thickener, thixotropic or anti-settling agent in paints and coatings, adhesives, sealants and putties as well as in oils. LUVOTIX® R is used as a flow and levelling agent in powder coatings.
LUVOTIX® R-RFCastor oil derivative,
inorganically modified
LUVOTIX® R-RF is used as a thickener and thixotropic agent in low to medium polar liquid organic systems. It is easy dispersible, improves the formulations workability and has been primarily developed for putties.
LUVOTIX® ZR 50Castor oil derivative,
inorganically modified
LUVOTIX® ZR50 controls the rheology properties of low polar solvent-based and solvent-free formulations, specifically in highly filled coatings, putties and sealants.
LUVOTIX® HTCastor oil derivative,
polyamide-modified
LUVOTIX® HT controls the rheology properties of low to medium polar liquid organic systems. It is used as a thickener, thixotropic or anti-settling agent in paints and coatings, adhesives, sealants and putties as well as in oils. In powder coating formulations, LUVOTIX® HT serves as a levelling agent.
LUVOTIX® HT-SFCastor oil derivative,
polyamide-modified
LUVOTIX® HT-SF describes the same application profile as LUVOTIX® HT with an easier activation.
LUVOTIX® ZH 5Castor oil derivative,
polyamide-modified,
with inorganic content
LUVOTIX® ZH5 controls the rheology properties of medium to higher polar solvent-based formulations. The material is free-flowing, easily dispersible and particularly suitable for highly filled systems.
LUVOTIX® ZH 50Castor oil derivative,
polyamide-modified,
with inorganic content
LUVOTIX® ZH50 controls the rheology properties of medium to higher polar liquid organic systems, specifically in highly filled formulations.
LUVOTIX® HPPolyamideLUVOTIX® HP is used in solvent-based and solvent-free medium to higher polar liquid organic systems. It is suitable as a thickener, thixotropic or anti-settling-agent in paints and coatings, adhesives, sealants, putties and other formulations.
LUVOTIX® ABBlend of polyamidesLUVOTIX® AB is used in solvent-based and solvent-free medium polar liquid organic systems. Its optimum performance is achieved at process temperatures between 50 and 65°C. It is suitable for highly filled and gloss systems. It is used in paints and coatings, adhesives as well as in sealants, putties and other formulations.
LUVOTIX® SABBlend of polyamidesLUVOTIX® SAB is suitable as a rheology additive for many applications in solvent-based and solvent-free formulations. Its optimum performance is achieved at process temperatures in the range of approx. 50-70°C, depending on the polarities in the formulation. LUVOTIX® SAB optimizes the sag-control and anti-settling properties and is particularly recommended for glossy acrylate or polyester based systems.
LUVOTIX® PABBlend of polyamidesLUVOTIX® PAB is used as a rheology additive in solvent-based and solvent-free medium to higher polar organic systems. Its optimum performance is achieved at process temperatures above 55°C. LUVOTIX® PAB can be used in primers as well as in glossy top-coat systems. It is suitable for industrial coatings, corrosion protection coatings, adhesives, putties and sealants.
LUVOTIX® P 100-15PolyolefinLUVOTIX® P100-15 is used to modify the flow behavior in medium to higher polar solvent-based and solvent-free formulations, especially as an efficient anti-settling agent.
LUVOTIX® VP031

Polyolefin/Stearic acid
derivative-hybrid

LUVOTIX® VP031 is used in solvent-based and solvent-free high-build coatings., adhesives and sealants. Due to its physical-chemical properties, LUVOTIX® VP031 is particularly easy to incorporate and activate.
LUVOTIX® LT1Blend of polyamidesLUVOTIX® LT1 can be activated at very low process temperatures, starting at 40°C. It is used in paints and coatings, adhesives and sealants, putties and other formulations.
LUVOTIX® TK12-pack-rheology additiveLUVOTIX® TK1 is used in situ in combination with crosslinker LUVOTIX® CL1. It is suitable for all systems independent of polarity. In topcoats, it is characterized by high gloss and transparency combined with excellent anti-sag properties.
LUVOTIX® CL1Amino-functional
crosslinker
LUVOTIX® CL1 is used as a crosslinker combined in situ with LUVOTIX® TK1 in a mixing ratio 30:100.
LUVOTIX® P25XPolyolefin paste,
25 % in Xylene
LUVOTIX® P25X is used as an anti-settling and sag-control agent in solvent-based formulations. It improves stabilization in zinc-rich primers.
LUVOTIX® R400Castor oil derivateLUVOTIX® R400 is used in powder coatings as process additive and flow modifier.
LUVOTIX® HT400Castor oil derivate,
polyamide modified
LUVOTIX® HT400 is used in powder coatings as process additive and flow modifier.

 

luvotix®---organic-rheology-additives-for-solvent-based-and-solvent-free-systems.pdf

LUVOTIX® - Organic rheology additives for water-based systems

LUVOTIX® ATAC are synthetic associative thickeners for water-based formulations, which are supplied as low-viscous acrylic emulsions. The anionic polymers develop viscosity after neutralization in the pH-range from 7.0 to 10.0.
Different shear-thinning rheological profiles can be achieved depending on the hydrophobic modifications of the molecules.

ProductsDescriptionApplication
LUVOTIX® ATAC L 100Hydophobically-modified associative thickener based on HASELUVOTIX® ATAC L 100 is a hydrophobically-modified associative thickener used in waterborne adhesives, sealants, paints and coatings to improve both storage stability and sag resistance and settling behavior. LUVOTIX® ATAC L 100 produces a highly pseudoplastic flow profile in waterborne formulations and is particularly recommended to increase viscosity in the low to medium shear range. 
LUVOTIX® ATAC M 400Non-associative thickener, based on ASELUVOTIX® ATAC M 400 is a VOC-free non-associative thickener for waterborne formulations and is used in paints, coatings as well as sealants and adhesives to improve color acceptance and wet abrasion. LUVOTIX® ATAC M 400 produces a highly pseudoplastic flow profile in waterborne formulations and is particularly recommended to increase the viscosity in all shear ranges.
LUVOTIX® ATAC H 700Hydophobically-modified associative thickener based on HASELUVOTIX® ATAC H 700 is a hydrophobically-modified anionic thickener for waterborne adhesives, sealants, paints, lacquers, and protective coatings. Use of LUVOTIX® ATAC H 700 improves the storage stability, levelling, and anti-splash system properties. LUVOTIX® ATAC H 700 produces a Newtonian flow profile in waterborne formulations and is particularly recommended to increase the viscosity in the high shear range. 
luvotix®-atac.pdf

LUVOTIX® ATUR are non-ionic hydrophobically modified polyurethanes used in water-based formulations, independent of pH-range. By tailored modifications of molecular structures, any desired rheological profile from newtonian to strong shear thinning can be obtained. LUVOTIX® ATUR are specifically designed for glossy, high-quality coatings when excellent surface levelling properties are desired after application.

ProductsDescriptionApplication
LUVOTIX® ATUR L 200Hydophobically-modified polyurethane thickener based on HEURLUVOTIX® ATUR L 200 is a hydrophobically-modified biobased polyurethane thickener. LUVOTIX® ATUR L 200 is used in waterborneadhesives, sealants, and paints and coatings and improves the rub-out resistance, storage stability and chemical/water resistance. LUVOTIX® ATUR L 200 is APEO- and VOC- free and is particularly recommended to increase viscosity in the low shear range.
LUVOTIX® ATUR M 500Hydophobically-modified polyurethane thickener based on HEURLUVOTIX® ATUR M 500 is a hydrophobically modified polyurethane thickener for waterborne adhesives, sealants, paints, lacquers and protective coatings that improves the levelling, spraying and sag resistance of waterborne formulations. LUVOTIX® ATUR M 500 has a pseudoplastic flow behavior and is particularly recommended for increasing viscosity in the medium shear rate range.
LUVOTIX® ATUR M 510Hydophobically-modified polyurethane thickener based on HEUR LUVOTIX® ATUR M 510 is a hydrophobically-modified polyurethane thickener for waterborne adhesives, sealants, paints, lacquers, and protective coatings that improves levelling, spraying and sag resistance. LUVOTIX® ATUR M 510 has a pseudoplastic flow behavior and is particularly recommended to increase viscosity in the medium shear range.
LUVOTIX® ATUR M 600Hydophobically-modified polyurethane thickener based on HEURLUVOTIX® ATUR M 600 is a hydrophobically-modified polyurethane thickener for waterborne adhesives, sealants, paints, and coatings that improves levelling, settling and sagging of waterborne formulations. LUVOTIX® ATUR M 600 has a pseudoplastic flow behavior and is particularly recommended to increase viscosity in the medium shear range.
LUVOTIX® ATUR H 800Hydophobically-modified polyurethane thickener based on HEURLUVOTIX® ATUR H 800 is a hydrophobically-modified polyurethane thickener for waterborne formulations, used in adhesives, sealants, paints, lacquers, and protective coatings to improve properties such as levelling, wet abrasion, and film formation. LUVOTIX® ATUR H 800 has a Newtonian flow behavior and is particularly recommended to increase viscosity in the high shear range. LUVOTIX® ATUR H 800 can be effectively combined with LUVOTIX® ATUR L 200.
luvotix®-atur.pdf

LUVOGEL® - Inorganic rheology additives for solvent-based and water-based systems

Naturally occurring and organically modified phyllosilicates from the LUVOGEL® series are used in water-based and solvent-based systems for rheology control. The powdered additives are incorporated directly at the beginning of the dispersing process or in form of pre-gels. Polar chemical activators are sometimes added to increase gel formation in solvent-based systems. Easily dispersible and self-activating LUVOGEL® additives enable fast and successful activation processes without the necessity to control the temperature.

ProductsDescriptionApplication
LUVOGEL® 4

Montmorillonite, organically modified

LUVOGEL® 4 is used as an anti-settling and sag-control agent in low to medium polar formulations such as industrial coatings, do-it-yourself-coatings, construction paints, primers, printing inks, adhesives and putties. The addition of a polar activator is recommended.
LUVOGEL® 4 BMontmorillonite, organically modifiedCompare LUVOGEL® 4 – LUVOGEL® 4B contains higher amount of organic component.
LUVOGEL® 7
 

Montmorillonite, organically modified

LUVOGEL® 7 is used as an anti-settling and sag-control agent in low to medium polar formulations such as industrial coatings, do-it-yourself-coatings, construction paints, primers and  printing inks. The addition of a polar activator is recommended.
LUVOGEL® SA 1

Montmorillonite, organically modified

LUVOGEL® SA1 is used as a self-activating anti-settling agent and rheology additive in solvent-based formulations of a wide polarity range, e.g. in industrial coatings, DIY paints, architectural paints, primers or printing inks.
LUVOGEL® SA 10

Montmorillonite, organically modified

LUVOGEL® SA10 is used as an anti-settling and sag-control agent in low polar aliphatic formulations.
LUVOGEL® EDMontmorillonite, organically modifiedLUVOGEL® ED creates a shear thinning flow profile with thixotropic properties and a slight viscosity increase in formulations.
LUVOGEL® G58

Layered silicate, organically modified

LUVOGEL® G58 is mainly used as a rheological and anti-settle additive in unsaturated polyester resins, epoxy resins and vinyl esters, especially in styrene-containing and solvent-containing formulations of different polarity, but also in solvent-free epoxy resin systems.
LUVOGEL® W1Montmorillonite

 

LUVOGEL® W1 is used in water-based formulations, e.g. adhesives, paints and coatings, cleaning agents, polishes, etc. It produces a pseudoplastic flow profile with thixotropic properties and improves settling behavior and flow control.
LUVOGEL® W3Montmorillonite

 

LUVOGEL® W3 is used in water-based formulations, e.g. adhesives, paints and coatings, cleaning agents, polishes, etc. It produces a pseudoplastic flow profile with thixotropic properties and improves settling behavior and flow control.
LUVOGEL® AQSynthetic HectoriteLUVOGEL® AQ is mainly used as a rheological additive in water-based formulations. The main areas of application are industrial coatings and automotive paints – OEM as well as After-Market. The products provide excellent stabilisation and orientation of effect pigments.
LUVOGEL® W2NSynthetic HectoriteLUVOGEL® W2N is mainly used as a rheological additive in water-based formulations. The main areas of application are industrial coatings and automotive paints – OEM as well as After-Market. The products provide excellent stabilisation and orientation of effect pigments.
LUVOGEL® WS1Synthetic HectoriteLUVOGEL® WS1 is a synthetic smectite clay modified by an inorganic sodium phosphate. It is used as a rheological additive in water-based formulations.
LUVOGEL® WS2Synthetic HectoriteLUVOGEL® WS2 is a synthetic smectite clay modified by an inorganic sodium phosphate. It is used as a rheological additive in water-based formulations.
luvogel®---inorganic-rheology-additives-for-solvent-based-and-water-based-systems.pdf
ProductAppearanceActive IngredientBoiling Point
[°C (hPa)]
Density
[g/cm3]
LUVOMAXX® Aminosilclear liquid3-aminopropyl triethoxy-silane69 (4)0,96
LUVOMAXX® Aminosil Mclear liquid3-aminopropyl-trimethoxy-silane 194 (1013)1,02
LUVOMAXX® Aminosil MMOclear liquid3-aminopropyl methyl- dimethoxysilane200 (1013)0,95
LUVOMAXX® Aminosil EDAclear liquidN-(2-aminoethyl)-3-amino-propyl trimethoxysilane147 (16)1,02
LUVOMAXX® Mercaptosilclear liquid3- mercaptopropyl-trimethoxysilane85 (4)1,07
LUVOMAXX® Methasilclear liquid3- methacryloxypropyl-trimethoxysilane205 (1013)1,05
LUVOMAXX® Epoxysilclear liquid3-glycidyloxypropyl-trimethoxysilane90 (1)1,06
LUVOMAXX® Octasilclear liquidn-octyl triethoxysilane84 (0,5 mm Hg)0,88
LUVOMAXX® Alkylsilanclear liquidn-dodecyl triethoxysilane125 (1,8 mm HG)0,89
LUVOMAXX® OVMSclear liquidvinyl-functional oligosiloxanen.a.1,0
LUVOMAXX® Vinyosil T 101clear liquidvinyl-functional organosilane (VTMOEO)110 (3)1,03
LUVOMAXX® Vinyosil T 102clear liquidvinyl-functional organosilane (VTEO)158 (1013)0,92
LUVOMAXX® Vinyosil T 103clear liquidvinyl-functional organosilane (VTMO)123 (1013)0,95
adhesion-promoters-/-silane-liquid-and-bound.pdf
Product
(Dry liquid preparations)
AppearanceActive ingredientContent
[% m/m]
Carrier
LUVOMAXX® AMEO DL 70white powder3-aminopropyl triethoxysilane70Silica
LUVOMAXX® GLYMO DL 70white powder3-glycidyloxypropyl trimethoxysilane70Silica
LUVOMAXX® MTMO DL 70white powder3-mercaptopropyl trimethoxysilane70Silica
LUVOMAXX® OVMS DL 70Clight-grey powdervinyl-functional oligosiloxane70Ca silica
LUVOMAXX® TESPT DL 50/Lwhite powderbis-[3-(triethoxysilyl)-propyl]-tetrasulfane50Silica
(BET: 125 m2/g)
LUVOMAXX® TESPT DL 70Clight-yellow powderbis-[3-(triethoxysilyl)-propyl]-tetrasulfane70Ca silica
LUVOMAXX® VTMO DL 70white powdervinyl trimethoxysilane70Silica
LUVOMAXX® VTMOEO DL 50light-grey powdervinyl-tris-(2-
methoxyethoxy)-silane
50Ca silica
LUVOMAXX® VTMOEO DL 70Clight-grey powdervinyl-tris-(2-
methoxyethoxy)-silane
70Ca silica
adhesion-promoters-/-silane-liquid-and-bound-dry-liquids.pdf

MAGRIS TALC series - natural talcs for putties and liquid compounds, adhesives and sealings

MAGRIS Talc products are high-purity, functional additives ideal for putties and liquid compounds. Talc improves dimensional stabilityand reinforces putties and liquid compounds, giving  added protection, against cracking and shrinking. Talc is the industry standard for sanding properties and polishing properties.

For putties and liquid compounds, adhesives and sealants we can offer also products from VERTAL® series with carbonic binding.

ApplicationsPhysical Properties
 
  • Putties, Pastes and Mastics
  • Joint Compounds
  • Patching Compounds
  • Grouts, Mortars and Plasters
  • Cementious Compounds
  • Self-levelling Compounds
 
 
  • Crack Resistance
  • Shrink Resistance
  • Sanding Properties
  • Cohesive Strength
  • Compressive Strength
 
applications-+-mechanical-performance.pdf
ProductFormApplicationBenefitsD50 sedigraphD98 sedigraphBrightness [GEB]
NICRON® 302Natural white powder, bagsSealants and Caulks, Pressure Sensitive and Structural AdhesivesHigh loading low viscosity, high brightness13ca. 30
(Hegman 3)
Y82
SILVERLINE® 303Natural white powder, bagsPastes & Mastics, cementitious and self-leveling Compounds, fineFiner top-size for smooth Finishes and application properties6,1ca. 4078
VERTAL® 92Natural white powder, talc/carbonate mineral pigment, bagsAuto Rep Grouts, Car Putties AutofillHighly lamellar talc, macrocrystalline 200 Mesh, good sanding for abrasive paper use17,5ca. 45Y72
VERTAL® 97Natural white powder, talc/carbonate mineral pigment, bagsPastes & Mastics, cementitious and self-leveling CompoundsHighly lamellar talc, macrocrystalline 200 Mesh, good sanding for abrasive paper use1550Y72
SILVERLINE® 002Natural white powder, bagsPastes & Mastics, cementitious and self-leveling CompoundsHigh loading low viscosity8,45575
VERTAL® TC-100Natural white powder, talc/carbonate mineral pigment, bagsPastes & Mastics, cementitious and self-leveling CompoundsImproves resistance to cracking, smoothing and sandability, macrocrystalline 200 Mesh16,4325 Mesh
(44 µm)
%passing
88
off white
VERTAL® AFNatural white powder, UL Environment labeled for sustainability, only BB 2000 lbsConstruction, Bitumen Roofing, Flooring, Adhesives, Sound DampingTalc with high carbonate (Mg) content, improved dimensional stability, cross-flow mechanical performance, and flexural stiffness23325 Mesh
(44 µm)
%passing
60-85
off white

 

magris-talc-series---natural-talcs-for-putties-and-liquid-compounds,-adhesives-and-sealings.pdf

Talc is oleophilic which gives it the ability to associate with liquid resins such as alkyds, epoxies, polyesters, acrylics, amines and polyols. In doing so, they create weak bonds with these resins that result in increased low-shear viscosity. When shear is applied the bonds break quickly, resulting in shear-thinning rheology that is ideal for many applications.

GradeMgO [%]CaO [%]Fe [%]Specific surface area (BET) [m2/g]Bulk density [g/l]
LUVOMAG® M07297,10,70,0470420
LUVOMAG® M07597,10,70,04100420
LUVOMAG® M07498,50,60,04145550
MgO N5098,00,60,02150220
magnesium-oxide.pdf
GradeRate of crystallizationViscosity
(ML 1+4 at 100°C)
Typical application/properties
DENKA A-30Fast20±3 (a)Spray adhesives
DENKA A-70Fast40±3 (a)General, low viscosity
DENKA A-90Fast48±4 (a)General
DENKA A-100Fast57±4 (a)General
DENKA A-120Fast67±5 (a)High viscosity
DENKA A-400Fast500-1500 (b)Extrem high viscosity
DENKA TA-85Fast44±5 (a)Thiuram-stabilized
DENKA M-120Medium900 (c)To be used with grades A and TA
DENKA M-130 LMedium1000-1500 (c)To be used with grades A and TA
DENKA M 130 HMedium1510-2700 (c)Like M130L, for high viscosity
polychloroprene.pdf

(a): Mooney viscosity MS2+2,5 at 100°C
(b): Solution viscosity (mPas)=5% toluene solution
(c): Solution viscosity (mPas)=10% toluene solution

Grade
(KUMHO KTR)
Styrene [%]Solution viscosity in 25wt% toluene [cps]
KTR-101304.500
KTR-201301.200
KTR-30140/
KTR-30246/
KTR-4013123,8
KTR-4022818
KTR-4032516
KTR-60133/
KTR-60240600
sbs-stirene-butadiene-stirene.pdf
GradeStyrene [%]Diblock contentSolution viscosity at 25°C, 25wt% Toluene
SIS LH-1115 wt%>1 wt%850-2000
SIS LH-7015 wt%60 wt%400-1000
SIS LH-1215 wt%25 wt%500-1500
SIS LH-1330 wt%< 1 wt%200-700
SIS LH-5015 wt%50 wt%500-1500
sbs-styrene-butadiene-styrene.pdf
GradeSoftening Point
[°C] (ASTM 28)
Color G#
(ASTM D1544)
M.Viscosity
175°C MPas
(ASTM D3236)
Application
C5 CL10095-105Max 4#Max 750Road Marking
C5 CL110295-105Max 5#Max 250Road Marking
C5 CL110495-105Max 3#Max 650HMA
CL610095-105Max 4#Max 650HMA, PSA
C5 CL620092-98Max 3#Max 350PSA tape
C5/C9 HB130090-96Max 3#Max 350PSA tape
C5/C9 HA109095-1053-5#Max 90HMA
GLUE&PSA
C5/C9 HA1110105-1153-5#Max 120HMA
GLUE&PSA
C5/C9 HA1115110-1203-5#Max 130HMA
GLUE&PSA
C5/C9 HA1120120-1263-5#Max 150HMA
GLUE&PSA
hydrocarbon-resins.pdf
GradeSoftening
Point °C
(ASTM E28)
Color G#
(ASTM D1544)
Acid V.
(ASTM D974)
Application
C9 GL10095-1053-5#Max 0.1HMA
C9 GL120110-1203-5#Max 0.1HMA
C9 GL130120-1303-5#Max 0.1HMA
C9 GP10095-1055-7#Max 0.1Wood HMA, Paints, Waterproof Adhesive
C9 GP120110-1205-7#Max 0.1Wood HMA, Paints, Waterproof Adhesive
C9 GP130120-1305-7#Max 0.1Wood HMA, Paints, Waterproof Adhesive
C9 GP140130-1405-7#Max 0.1Wood HMA, Paints, Waterproof Adhesive
C9 GP150140-1505-7#Max 0.1Wood HMA, Paints, Waterproof Adhesive
hydrocarbon-resins-2.pdf
GradeAppearanceSoftening Point °CColor Gardner
YS POLYESTER T160Bead155-165Max 4
YS POLYESTER T145Bead140-150Max 4
YS POLYESTER T130Bead125-135Max 4
YS POLYESTER T115Bead110-120Max 4
YS POLYESTER T100Bead95-105Max 8
YS POLYESTER T80Bead or block80-90Max 8
terpene-phenolic-resins.pdf
GradeDescriptionBrookfield Viscosity
[Cps]
(20°C)
Solid content
[%]
Ph
DELMA-VIL DLHomopolymer, acetovinyl-modified, plasticizedexternally18000-2400049-516-8
DELMA-VIL 60Homopolymer, acetovinyl-modified, stabilized withpolyvinyl alcohol(solvent- and phthalates-free)48000-6800059-614-5
DELMA-VIL 50Homopolymer, acetovinyl-modified, stabilized withpolyvinyl alcohol(solvent- and phthalates-free)45000-6000049-514-5
vinyl-acetate-homopolymer-and-copolymer-dispersions.pdf

MAIL SFR fluids are clear and odorless reactive polydimethyl siloxanes with  terminal hydroxyl groups. They are used for silicone adhesives, specialty coatings, sealants and elastomeric systems, as well as components of medical and dental products.

GRADEViscosity [cSt]
@ 25°C
Specific Gravity
@ 25°C
Refractive Index
@ 25°C
MASIL SFR 70700,9751402
MASIL SFR 1001000,9751402
MASIL SFR 7507500,9761403
MASIL SFR 20002.0000,9761403
MASIL SFR 35003.5000,9761403
MASIL SFR 2000020.0000,9801403
MASIL SFR 5000050.0000,9801403
reactive-silicones.pdf

POLYCAPROLACTONE - COPOLYESTER FOR ADHESIVES

LUBRIZOL
PEARLSTICKTM
Viscosity
mPas(20°C (*)
Minimum Activation TemperatureCrystallization Rate
(MQSA 12 B)
Thermoplasticity
(MQSA 68 A)
45-40/08650-950Approx. 45°CVery HighMedium
45-40/151300-1700Approx. 45°CVery HIghMedium
45-40/191700-2100Approx. 45°CVery HighMedium
45-40/272500-2900Approx. 45°CVery HighMedium
45-50/181600-2000Approx. 55°CExtremely HighMedium-Low
45-50/222000-2400Approx. 55°CExtremely HighMedium-Low
45-50/292400-3200Approx. 55°CExtremely HighMedium-Low
45-60/03200-400Approx. 50°CExtremely HighLow
45-60/08650-950Approx. 50°CExtremely HighLow
45-60/141200-1600Approx. 50°CExtremely HighLow
45-60/181600-2000Approx. 50°CExtremely HighLow
45-60/252300-2700Approx. 50°CExtremely HighLow
45-80/161400-1800N/AVery LowLow
45-90/03150-450Approx. 40°CLowLow
45-90/06450-750Approx. 40°CLowLow
45-90/121000-1400Approx. 40°CLowLow
thermoplastic-polyurethane-for-adhesives-1.pdf

POLYESTER BASED TPUs

LUBRIZOL
PEARLSTICKTM
Viscosity
mPas(20°C (*)
Minimum Activation TemperatureCrystallization Rate
(MQSA 12 B)
Ttermoplasticity
(MQSA 68 A)
D40-70/03100-500Approx. 60°CExtremely HighVery Low
D40-70/08500-1100Approx. 60°CExtremely HighVery Low
D40-70/141150-1600Approx. 60°CExtremely HighVery Low
D40-70/181600-2100Approx. 60°CExtremely HighVery Low
D40-70/252100-2900Approx. 60°CExtremely HighVery Low
D40-70/332900-3700Approx. 60°CExtremely HighVery Low
46-10/01100-200Approx. 50°CVery HighHigh
46-10/06450-750Approx. 50°CVery HighHigh
46-10/121000-1400Approx. 50°CVery HighHigh
46-10/161400-1800Approx. 50°CVery HighHigh
48-60/03200-600Approx. 60°CVery HighMedium-Low
48-60/151100-1700Approx. 60°CVery HighMedium-Low
48-60/191700-2200Approx. 60°CVery HighMedium-Low
48-60/252200-2700Approx. 60°CVery HighMedium-Low
45-60/302700-330Approx. 60°CVery HighMedium-Low
thermoplastic-polyurethane-for-adhesives-2.pdf


POLYCAPROLACTONE, POLYESTER & COPOLYESTER TPUs FOR TOE PUFFS AND COUNTERS

LUBRIZOL
PEARLBONDTM
MFI (ISO 1133)
(g/10min.)
Viscosity
160°C
(ISO 1133)
Pas
Shore Hardness
(MQSA 70 A)
°C
Thermoplasticity
(MQSA 68 A)
Crystallization Rate
(MQSA 12 B)
ECO D59030-60 (1)93080-85Very HighExtremely High
10015-30 (1)70064-68Very HighVery High
10130-60 (1)38063-67Very HighVery High
10360-100 (1)19060-64Very HighVery High
1044-10 (1)2950110-130HighHigh
10610-30 (1)115085-110Very HighHigh
12015-30 (2)55062-66Very High
12130-60 (1)38063-67Very HighExtremely High
122105-160 (2)220065-69Very HighExtremely High
12360-100 (1)18060-64Very HighExtremely High
18010-30 (1)62065-71Very HighVery High
125/H35-55 (3)890130-140*--
12 C 7515-40 (4)1050125-135*--
thermoplastic-polyurethane-for-adhesives-3.pdf

(1) 170°C / 2,16 kg    (2) 170° / 21,6 kg    (3) 190°C / 2,16 kg    (4) 177°C / 2,16 kg

* Temperature at which MFI=10g/10min. @ 2,16 kg

POLYCAPROLACTONE, POLYESTER & COPOLYESTER TPUs FOR REACTIVE HOLT MELT

LUBRIZOL
PEARLBONDTM
MFI (ISO 1133)
(g/10min.)
Viscosity @ 130°C
(ISO 1133)
Pas
Shore Hardness
(MQSA 70 A)
°C
Crystallization Rate
(MQSA 12 B)
DAP 89360-120 (1)38063-67Low
50840-90 (2)750073-77Low
58010-30 (1)270065-71High
55010-30 (1)270066-70High
502105-160 (2)495059-63High
50015-30 (1)157064-68High
50130-60 (1)95063-67High
50360-100 (1)50060-64High
522105-160 (2)490065-69Very High
52015-30 (1)195064-68Very High
52130-60 (1)76063-67Very High
52360-100 (1)38060-64Very High
539150-200 (1)17058-60Very High
ECO D 59030-60 (1)168080-84Extremely High
thermoplastic-polyurethan-for-adhesives-4.pdf


(1) 170°C / 2,16 kg    (2) 170°C / 21,6 kg

PearlstickTM and PearlbondTM Trademarks are the property of The Lubrizol Corporation.

Urea-formaldehyde resins
Active transparent zinc oxide
Fumed silica
Polyvinyl alcohol
Magnesium sulfate

Paints, Varnishes and Inks

LUVOTIX® - Organic rheology additives for solvent-based and solvent-free systems

LUVOTIX® rheology additives are fine, micronized waxes that are mainly made from renewable raw materials. The powders are based on castor oil derivatives, fatty acid amides and polyolefins.
Depending on the polarity of the formulation, the additives are incorporated directly in powdered form in a time- and temperature-controlled dispersion process. In addition to the standard types that have been tested and proven for many years, rheology additives that are particularly easy to activate are also available. The latter develop their full effectiveness after dispersion under shear even at lower temperatures.

ProductsDescriptionApplication
LUVOTIX® RCastor oil derivativeLUVOTIX® R controls the rheology properties of low to medium polar liquid organic systems. It is used as a thickener, thixotropic or anti-settling agent in paints and coatings, adhesives, sealants and putties as well as in oils. LUVOTIX® R is used as a flow and levelling agent in powder coatings.
LUVOTIX® R-RFCastor oil derivative,
inorganically modified
LUVOTIX® R-RF is used as a thickener and thixotropic agent in low to medium polar liquid organic systems. It is easy dispersible, improves the formulations workability and has been primarily developed for putties.
LUVOTIX® ZR 50Castor oil derivative,
inorganically modified
LUVOTIX® ZR50 controls the rheology properties of low polar solvent-based and solvent-free formulations, specifically in highly filled coatings, putties and sealants.
LUVOTIX® HTCastor oil derivative,
polyamide-modified
LUVOTIX® HT controls the rheology properties of low to medium polar liquid organic systems. It is used as a thickener, thixotropic or anti-settling agent in paints and coatings, adhesives, sealants and putties as well as in oils. In powder coating formulations, LUVOTIX® HT serves as a levelling agent.
LUVOTIX® HT-SFCastor oil derivative,
polyamide-modified
LUVOTIX® HT-SF describes the same application profile as LUVOTIX® HT with an easier activation.
LUVOTIX® ZH 5Castor oil derivative,
polyamide-modified,
with inorganic content
LUVOTIX® ZH5 controls the rheology properties of medium to higher polar solvent-based formulations. The material is free-flowing, easily dispersible and particularly suitable for highly filled systems.
LUVOTIX® ZH 50Castor oil derivative,
polyamide-modified,
with inorganic content
LUVOTIX® ZH50 controls the rheology properties of medium to higher polar liquid organic systems, specifically in highly filled formulations.
LUVOTIX® HPPolyamideLUVOTIX® HP is used in solvent-based and solvent-free medium to higher polar liquid organic systems. It is suitable as a thickener, thixotropic or anti-settling-agent in paints and coatings, adhesives, sealants, putties and other formulations.
LUVOTIX® ABBlend of polyamidesLUVOTIX® AB is used in solvent-based and solvent-free medium polar liquid organic systems. Its optimum performance is achieved at process temperatures between 50 and 65°C. It is suitable for highly filled and gloss systems. It is used in paints and coatings, adhesives as well as in sealants, putties and other formulations.
LUVOTIX® SABBlend of polyamidesLUVOTIX® SAB is suitable as a rheology additive for many applications in solvent-based and solvent-free formulations. Its optimum performance is achieved at process temperatures in the range of approx. 50-70°C, depending on the polarities in the formulation. LUVOTIX® SAB optimizes the sag-control and anti-settling properties and is particularly recommended for glossy acrylate or polyester based systems.
LUVOTIX® PABBlend of polyamidesLUVOTIX® PAB is used as a rheology additive in solvent-based and solvent-free medium to higher polar organic systems. Its optimum performance is achieved at process temperatures above 55°C. LUVOTIX® PAB can be used in primers as well as in glossy top-coat systems. It is suitable for industrial coatings, corrosion protection coatings, adhesives, putties and sealants.
LUVOTIX® P 100-15PolyolefinLUVOTIX® P100-15 is used to modify the flow behavior in medium to higher polar solvent-based and solvent-free formulations, especially as an efficient anti-settling agent.
LUVOTIX® VP031

Polyolefin/Stearic acid
derivative-hybrid

LUVOTIX® VP031 is used in solvent-based and solvent-free high-build coatings., adhesives and sealants. Due to its physical-chemical properties, LUVOTIX® VP031 is particularly easy to incorporate and activate.
LUVOTIX® LT1Blend of polyamidesLUVOTIX® LT1 can be activated at very low process temperatures, starting at 40°C. It is used in paints and coatings, adhesives and sealants, putties and other formulations.
LUVOTIX® TK12-pack-rheology additiveLUVOTIX® TK1 is used in situ in combination with crosslinker LUVOTIX® CL1. It is suitable for all systems independent of polarity. In topcoats, it is characterized by high gloss and transparency combined with excellent anti-sag properties.
LUVOTIX® CL1Amino-functional
crosslinker
LUVOTIX® CL1 is used as a crosslinker combined in situ with LUVOTIX® TK1 in a mixing ratio 30:100.
LUVOTIX® P25XPolyolefin paste,
25 % in Xylene
LUVOTIX® P25X is used as an anti-settling and sag-control agent in solvent-based formulations. It improves stabilization in zinc-rich primers.
LUVOTIX® R400Castor oil derivateLUVOTIX® R400 is used in powder coatings as process additive and flow modifier.
LUVOTIX® HT400Castor oil derivate,
polyamide modified
LUVOTIX® HT400 is used in powder coatings as process additive and flow modifier.

 

luvotix®---organic-rheology-additives-for-solvent-based-and-solvent-free-systems.pdf

LUVOTIX® - Organic rheology additives for water-based systems

LUVOTIX® ATAC are synthetic associative thickeners for water-based formulations, which are supplied as low-viscous acrylic emulsions. The anionic polymers develop viscosity after neutralization in the pH-range from 7.0 to 10.0.
Different shear-thinning rheological profiles can be achieved depending on the hydrophobic modifications of the molecules.

ProductsDescriptionApplication
LUVOTIX® ATAC L 100Hydophobically-modified associative thickener based on HASELUVOTIX® ATAC L 100 is a hydrophobically-modified associative thickener used in waterborne adhesives, sealants, paints and coatings to improve both storage stability and sag resistance and settling behavior. LUVOTIX® ATAC L 100 produces a highly pseudoplastic flow profile in waterborne formulations and is particularly recommended to increase viscosity in the low to medium shear range. 
LUVOTIX® ATAC M 400Non-associative thickener, based on ASELUVOTIX® ATAC M 400 is a VOC-free non-associative thickener for waterborne formulations and is used in paints, coatings as well as sealants and adhesives to improve color acceptance and wet abrasion. LUVOTIX® ATAC M 400 produces a highly pseudoplastic flow profile in waterborne formulations and is particularly recommended to increase the viscosity in all shear ranges.
LUVOTIX® ATAC H 700Hydophobically-modified associative thickener based on HASELUVOTIX® ATAC H 700 is a hydrophobically-modified anionic thickener for waterborne adhesives, sealants, paints, lacquers, and protective coatings. Use of LUVOTIX® ATAC H 700 improves the storage stability, levelling, and anti-splash system properties. LUVOTIX® ATAC H 700 produces a Newtonian flow profile in waterborne formulations and is particularly recommended to increase the viscosity in the high shear range. 
luvotix®-atac.pdf

LUVOTIX® ATUR are non-ionic hydrophobically modified polyurethanes used in water-based formulations, independent of pH-range. By tailored modifications of molecular structures, any desired rheological profile from newtonian to strong shear thinning can be obtained. LUVOTIX® ATUR are specifically designed for glossy, high-quality coatings when excellent surface levelling properties are desired after application.

ProductsDescriptionApplication
LUVOTIX® ATUR L 200Hydophobically-modified polyurethane thickener based on HEURLUVOTIX® ATUR L 200 is a hydrophobically-modified biobased polyurethane thickener. LUVOTIX® ATUR L 200 is used in waterborneadhesives, sealants, and paints and coatings and improves the rub-out resistance, storage stability and chemical/water resistance. LUVOTIX® ATUR L 200 is APEO- and VOC- free and is particularly recommended to increase viscosity in the low shear range.
LUVOTIX® ATUR M 500Hydophobically-modified polyurethane thickener based on HEURLUVOTIX® ATUR M 500 is a hydrophobically modified polyurethane thickener for waterborne adhesives, sealants, paints, lacquers and protective coatings that improves the levelling, spraying and sag resistance of waterborne formulations. LUVOTIX® ATUR M 500 has a pseudoplastic flow behavior and is particularly recommended for increasing viscosity in the medium shear rate range.
LUVOTIX® ATUR M 510Hydophobically-modified polyurethane thickener based on HEUR LUVOTIX® ATUR M 510 is a hydrophobically-modified polyurethane thickener for waterborne adhesives, sealants, paints, lacquers, and protective coatings that improves levelling, spraying and sag resistance. LUVOTIX® ATUR M 510 has a pseudoplastic flow behavior and is particularly recommended to increase viscosity in the medium shear range.
LUVOTIX® ATUR M 600Hydophobically-modified polyurethane thickener based on HEURLUVOTIX® ATUR M 600 is a hydrophobically-modified polyurethane thickener for waterborne adhesives, sealants, paints, and coatings that improves levelling, settling and sagging of waterborne formulations. LUVOTIX® ATUR M 600 has a pseudoplastic flow behavior and is particularly recommended to increase viscosity in the medium shear range.
LUVOTIX® ATUR H 800Hydophobically-modified polyurethane thickener based on HEURLUVOTIX® ATUR H 800 is a hydrophobically-modified polyurethane thickener for waterborne formulations, used in adhesives, sealants, paints, lacquers, and protective coatings to improve properties such as levelling, wet abrasion, and film formation. LUVOTIX® ATUR H 800 has a Newtonian flow behavior and is particularly recommended to increase viscosity in the high shear range. LUVOTIX® ATUR H 800 can be effectively combined with LUVOTIX® ATUR L 200.
luvotix®-atur.pdf

LUVOGEL® - Inorganic rheology additives for solvent-based and water-based systems

Naturally occurring and organically modified phyllosilicates from the LUVOGEL® series are used in water-based and solvent-based systems for rheology control. The powdered additives are incorporated directly at the beginning of the dispersing process or in form of pre-gels. Polar chemical activators are sometimes added to increase gel formation in solvent-based systems. Easily dispersible and self-activating LUVOGEL® additives enable fast and successful activation processes without the necessity to control the temperature.

ProductsDescriptionApplication
LUVOGEL® 4

Montmorillonite, organically modified

LUVOGEL® 4 is used as an anti-settling and sag-control agent in low to medium polar formulations such as industrial coatings, do-it-yourself-coatings, construction paints, primers, printing inks, adhesives and putties. The addition of a polar activator is recommended.
LUVOGEL® 4 BMontmorillonite, organically modifiedCompare LUVOGEL® 4 – LUVOGEL® 4B contains higher amount of organic component.
LUVOGEL® 7
 

Montmorillonite, organically modified

LUVOGEL® 7 is used as an anti-settling and sag-control agent in low to medium polar formulations such as industrial coatings, do-it-yourself-coatings, construction paints, primers and  printing inks. The addition of a polar activator is recommended.
LUVOGEL® SA 1

Montmorillonite, organically modified

LUVOGEL® SA1 is used as a self-activating anti-settling agent and rheology additive in solvent-based formulations of a wide polarity range, e.g. in industrial coatings, DIY paints, architectural paints, primers or printing inks.
LUVOGEL® SA 10

Montmorillonite, organically modified

LUVOGEL® SA10 is used as an anti-settling and sag-control agent in low polar aliphatic formulations.
LUVOGEL® EDMontmorillonite, organically modifiedLUVOGEL® ED creates a shear thinning flow profile with thixotropic properties and a slight viscosity increase in formulations.
LUVOGEL® G58

Layered silicate, organically modified

LUVOGEL® G58 is mainly used as a rheological and anti-settle additive in unsaturated polyester resins, epoxy resins and vinyl esters, especially in styrene-containing and solvent-containing formulations of different polarity, but also in solvent-free epoxy resin systems.
LUVOGEL® W1Montmorillonite

 

LUVOGEL® W1 is used in water-based formulations, e.g. adhesives, paints and coatings, cleaning agents, polishes, etc. It produces a pseudoplastic flow profile with thixotropic properties and improves settling behavior and flow control.
LUVOGEL® W3Montmorillonite

 

LUVOGEL® W3 is used in water-based formulations, e.g. adhesives, paints and coatings, cleaning agents, polishes, etc. It produces a pseudoplastic flow profile with thixotropic properties and improves settling behavior and flow control.
LUVOGEL® AQSynthetic HectoriteLUVOGEL® AQ is mainly used as a rheological additive in water-based formulations. The main areas of application are industrial coatings and automotive paints – OEM as well as After-Market. The products provide excellent stabilisation and orientation of effect pigments.
LUVOGEL® W2NSynthetic HectoriteLUVOGEL® W2N is mainly used as a rheological additive in water-based formulations. The main areas of application are industrial coatings and automotive paints – OEM as well as After-Market. The products provide excellent stabilisation and orientation of effect pigments.
LUVOGEL® WS1Synthetic HectoriteLUVOGEL® WS1 is a synthetic smectite clay modified by an inorganic sodium phosphate. It is used as a rheological additive in water-based formulations.
LUVOGEL® WS2Synthetic HectoriteLUVOGEL® WS2 is a synthetic smectite clay modified by an inorganic sodium phosphate. It is used as a rheological additive in water-based formulations.
luvogel®---inorganic-rheology-additives-for-solvent-based-and-water-based-systems.pdf

WOLLATROP® - Inorganic rheology additives for water-based systems

WOLLATROP® are hydrated and inverted ribbon silicates that are used as inorganic thickeners in water-based systems. The additives are particularly easy to incorporate into formulations thanks to their filamentous and flexible structure. Unlike classic phyllosilicates, WOLLATROP® products develop a stable structure immediately after incorporation, which leads to increased viscosity, especially in the low shear rate range. WOLLATROP® products are characterized by a high tolerance to changes in ionic strength and pH fluctuations.

ProductDescriptionApplication
WOLLATROP®-SRibbon silicates with fine fiber distributionPreferred use in paints, varnishes and coatings.
WOLLATROP®-SERibbon silicates with fine fiber distributionPreferred use in paints, varnishes and coatings.
WOLLATROP®-MAbsorbent filler based on ribbon silicatesApplication as rheology additive in construction chemical products such as mortars, construction and tile adhesives, fillers and filling compounds, but also high build coatings and wall or facade paints. Particularly suitable for use at high temperature.
WOLLATROP®-LVSilicate fibers, organically modifiedPreferred use in water-based coatings with low to medium layer thickness as well as in construction chemical products, such as adhesives or plasters.
WOLLATROP®-S/240Silicate hybridWOLLATROP®-S/240 is an economical rheology additive. It can be used as a multifunctional rheology additive in construction chemical products or high build coatings that require micro-reinforcement or crack bridging in addition to rheological adjustment.
wollatrop®-inorganic-rheology-additives-for-water-based-systems.pdf
GradeDescriptionBrookfield yiscosity [Cps] @20°CSolid content [%]Ph
DELMA-VIL V 30Copolymerofvinylacetatewithvinylversatate3000-500049-514-5
DELMA-VIL 60Acetovinylhomopolymerstabilized withpolyvinyl alcohol(solvent- and phthalate-free)35000-5000059-614-5
DELMA-VIL 50MAcetovinylhomopolymerstabilized withpolyvinyl alcohol(solvent- and phthalate-free)15000-2100049-514-5
DELMA-CRIL S390Acrylic ester and syrene based polymer6000-1600049-518-9
aqueous-vinyl-acetate,-vinyl-versatate-and-styrene-acrylic-dispersions.pdf

MAGRIS TALC series - lamellar and microcrystalline talcs for Paints & Coatings applications

Mineral fillers for paint and coatings improve or influence technical and / or optical properties such as colour, hiding power and brightness. They are used to increase the volume, change the material density value and reduce the formulation costs of end customers. Other properties can be the anticorrosion protection in lacquers, influence of rheology in paints, increase scratch resistance and improve UV protection or flame-resistance of end products.

Rheology PerformancePhysical Properties
 
  • Cost-Effective Thixotrope
  • Sag Resistance
  • Slump Resistance
  • Anti-Settling Properties
  • Easy to Disperse
 
 
  • Softest Mineral on earth
  • Highly Lamellar and Platy
  • Hydrophobic
  • Oleophilic (natural affinity with oils)
  • Inert
 
rheology-performance-and-physical-properties--.pdf

ARTIC MIST®, CIMPACT®, JetWhite®, JetFill®, JetFill®M, MAGRIS TALC MISTRON®, NICRON®, SIERRALITE®, SILVERLINE®, STELLAR®, VERTAL®, YELLOWSTONE®

In the modern world of paint industry today, talc is more than a simple mineral filler. MAGRIS TALC offers highly lamellar talc products as well as microcrystalline and engineered types fine-grades reduced. 

Bright white JETWHITE® und MISTRON® products as well as cost-effective NICRON® and SILVERLINE® products offer the laboratory developer a high degree of flexibility to balance the advantages of technical colour performance and improved process ability with rising raw material prices and higher production output.

ProductFormApplicationBenefitsD50 sedigraphD98 sedigraphBrightness [GEB]
JetWhite® 1H/HCNatural white powder, submicron talc, bagsAdditive for decorative paints, can coatingFor maximum hiding power and brightness, TiO2 extender1.1ca. 6
(Hegman 7.5)
Y90
JetWhite® 7H/HCNatural white powder, ultrafine talc, bagsAdditive for decorative paints, can coatingFor maximum hiding power and brightness, TiO2 extender1.9ca. 8
(Hegman 7)
Y91
NICRON® 665Natural white powder, microcrystalline talc, bagsArchitectural and industrial primers and topcoatsFilm strength and flexibility, provides barrier properties, very bright1.2ca. 9
(Hegman 6.5)
87
MISTRON®
MONOMIX
Natural white powder, micronzed talc, bagsEngineered and high performance, industrial and primers, protective coatingsHigh surface area and tight top-size control, anticorrosive functionality, rheology contribution2ca. 10
(Hegman 6)
88
NICRON® 604
SILVERLINE® 604
Natural white powder, microcrystalline talc, bagsArchitectural and industrial primers and topcoatsFilm strength and flexibility, provides barrier properties, improve corrosion resistance and stain-blocking ability2.3ca. 12
(Hegman 6)
85
STELLAR® 510Natural white powder, lamellar talc, bagsArchitectural and topcoats where high brightness is neededFilm strength and flexibility, provides barrier properties, very bright5ca. 15
(Hegman 5.5)
Y88
SILVERLINE® 504Natural white powder, microcrystalline talc, bagsArchitectural and industrial primers, non-color sensitive applicationsImprove corrosion resistance and stain-blocking ability, improve sag resistance and maximize prime pigment extension3.2ca. 20
(Hegman 5)
81
NICRON® 403
MISTRON® 403
Natural white powder, microcrystalline talc, bagsArchitectural, wood and industrial primers and topcoatsFilm strength and flexibility, provides barrier properties, semi-transparent wood stains to prevent tannin bleed, improve corrosion resistance and stain-blocking ability4.7
4.5
ca. 25
(Hegman 4)
83
86
JetWhite® 4HNatural white powder, medium talc, bagsDecorative paints, architectural and industrial primersImprove barrier properties which impart corrosion resistance and stain blocking ability5.7(Hegman 4-4.5)Y90
VERTAL® 77Natural white powder, talc/carbonate mineral pigment, bagsWaterborne primers architectural and industrial, stain-blocking primers, sealers, undercoatersProvides a unique balance of prime pigment spacing (opacity), film reinforcement, anti-cracking and barrier properties9ca. 2578
NICRON® 303Natural white powder, microcrystalline talc, bagsArchitectural, wood and industrial primers, also adhesive, sealant, caulk, joint compound, wood putty, and auto body patch applicationsFilm strength and flexibility, provides barrier properties, improve corrosion resistance and stain-blocking ability, good sandability7ca. 30
(Hegman 3)
82
MISTRON® 303
NICRON® 302
Natural white powder, microcrystalline engineered talc, bagsProtective coatings and marine coating applications, architectural flat exterior latex paintsDisperses easily in high-solids and solvent-borne coatings, good paint stability, rheology and anti-settling properties. Low sheen, good touch-up, good fade- and chalk-resistance7.5
13
ca. 35
(Hegman 3)
80
84
VERTAL® 92Natural white powder, talc/carbonate mineral pigment, bagsAuto Rep Grouts, Car Putties AutofillHighly lamellar talc, macrocrystalline 200 Mesh, good sanding for abrasive paper use17.5ca. 45-50Y72
SILVERLINE® 202Natural white powder, microcrystalline engineered talc, bagsAirless-spray architectural waterborne flat paintsEngineered talc recommended where low viscosity build pigments are required, providing excellent sheen control, scrub resistance with minimal wear on airless spray equipment19.8ca. 50
(Hegman 2.5)
76
JetWhite® 2HNatural white powder, coarser talc, bagsDecorative paints, architectural and industrial primersImprove barrier properties which impart corrosion resistance and stain blocking ability11ca. 60
(Hegman 2)
Y87
JetFil® M200Natural white powder, bagsGeneral purpose applications for coarse talcsHigh purity, platy, coarse talc10ca. 60
(Hegman 2)
Y78
SILVERLINE® 001Natural white powder, bagsIndustrial floor screed, coarse fillerConcrete form lubricant, parting agent for rolled asphalt, roofing, floor tile14ca. 40 - 60off white
VERTAL® AFNatural white powder, UL Environment labeled for sustainability, only BB 2000 lbsConstruction, Bitumen Roofing, Flooring, Adhesives, Sound DampingTalc with high magnesite content23325 Mesh
(44 µm)
%passing
60-85
off white
magris-talc-series---lamellar-and-microcrystalline-talcs-for-paints-&-coatings-applications.pdf

Closed cell perlite based hollow microspheres TRI-SPHERES®

Description

TRI-SPHERES® are hollow multi-cellular microspheres with a popcorn structure on a silicate basis. TRI-SPHERES® serve as functional lightweight fillers. Their heat resistance is up to 1,500 °C. Their compressive strength ends at 3,260 PSI / 22.5 Mpa. With a view to any shear forces occurring during the incorporation, their multi-cellular structure avoids that all spheres are destroyed at high forces. TRI-SPHERES® are marked by a clear bright colour.

Application

TRI-SPHERES® can be used as lightweight fillers in many different applications such as paints and coatings, foams in composites as well as in hydraulic-setting cement for construction chemistry (TRI-SPHERES® 120 XL). With a view to the optimisation of acoustic and thermal properties, TRI-SPHERES® 270, 300 and 352 are recommended. In particular the fine TRI-SPHERES® 45XS Ultra achieves good results in partial weight reduction of PP polymer for injection mouldingwhen adding 10 – 15 % as an additive for the last step.

ProductsD10 [μm]D90 [μm]Bulk
density
[kg/m³]
Crush
strength
[psi]
Effective
density
[kg/m³]
TRI-SPHERES® 120XL4501.050120< 725-
TRI-SPHERES® 200100340200< 725440
TRI-SPHERES® 250100500250-520
TRI-SPHERES® 270150350270-580
TRI-SPHERES® 30075270300725610
TRI-SPHERES® 3521152753501.030800
TRI-SPHERES® 4021152454001.581890
TRI-SPHERES® 450752304502.176720
TRI-SPHERES® 300S701353001.015660
TRI-SPHERES® 400S751604001.421690
TRI-SPHERES® 45XS ULTRA35804503.263960

The stated values correspond to typical values and hence do not represent a specification.

tri-spheres®.pdf

Cenospheres OMEGA-SPHERES®

Hollow ceramic microspheres are extremely resistant hollow spheres, which are formed under the exposure of extreme heat. Temperatures over the relevant melting points are required to achieve a ceramic melting. Drops with a hollow are formed as a result of the subsequent rapid cooling process. The OMEGA-SPHERES® formed in this way are refined and fractionated in subsequent processes, thus being a high-quality raw material in your formulations.

The spheres we provide are produced at various production sites for global availability. Globally produced standard types are manufactured in the Ukraine and Germany. Special types are produced in Germany. There are further suppliers in Europe and throughout the world.

OMEGA-SPHERES®, Grey

Description

OMEGA-SPHERES® are hollow ceramic microspheres > 150 μm which are used as functional lightweight filler is several industries. OMEGA-SPHERES® are characterised by a high thermal and mechanic resistance and are available in different distribution particle sizes.

Application

Because of their weight-reducing and insulating properties, OMEGA-SPHERES® are used preferentially in construction chemical products such as adhesives and sealants. They are also used as pore generators in friction and brake linings as well as in grinding and separating tools.

ProductsParticle size
[μm]
Bulk
density
[kg/m³]
Crush
strength
[MPa]
Temperature
max.
[°C]
OMEGA-SPHERES® 1500 - 150390141,200
OMEGA-SPHERES® 3000 - 300400141,200
OMEGA-SPHERES® SG0 - 500400141,200
OMEGA-SPHERES® G250-6250 - 700400141,200

The stated values correspond to typical values and hence do not represent a specification.

omega-spheres®,-grey.pdf

OMEGA-SPHERES®, White

Description

OMEGA-SPHERES® W are marked by a particularly high thermal resistance, low iron content and a white colour. They are available in different distribution particle sizes.

Application

Because of their particularly high heat resistance, OMEGA-SPHERES® W are preferentially used in the refractory and foundry industries. The white colour allows their use in aesthetically demanding applications such as decorative plasters and wall paints.

ProductsParticle size
[μm]
Bulk
density
[kg/m³]
Crush
strength
[MPa]
Temperature
max.
[°C]
OMEGA-SPHERES® W1500 - 150410251,600
OMEGA-SPHERES® W3000 - 300410251,600
OMEGA-SPHERES® WM150 - 300390251,600
OMEGA-SPHERES® W250-6250 - 700400251,600

The stated values correspond to typical values and hence do not represent a specification.

omega-spheres®,-white.pdf

Cenospheres THERMO-SPHERES®

THERMO-SPHERES®, Grey

Description

THERMO-SPHERES® G are high quality hollow ceramic microspheres < 150 μm, which are characterised by a high degree of fineness as well as a particularly high mechanical strength. The products are pre-dried. Because of the high fineness, they display good grinding properties and are, therefore, highly suitable as insulation and lightweight filling materials.

Application

THERMO-SPHERES® G are used in applications which require the use of particularly small hollow microspheres or make high demands on surface finish. This includes, apart from the use in paints and coatings, composite materials, special casting compounds and putties, adhesives and sealants.

ProductsParticle size
[μm]
Bulk
density
[kg/m³]
Crush
strength
[MPa]
Temperature
max.
[°C]
THERMO-SPHERES® G750 - 75350141,200
THERMO-SPHERES® G1000 - 100400141,200

The stated values correspond to typical values and hence do not represent a specification.

thermo-spheres®,-grey.pdf

THERMO-SPHERES® White

Description

THERMO-SPHERES® W are white, high quality hollow ceramic microspheres < 150 μm, which are characterised by a high degree of fineness as well as a particularly high mechanical strength. The products are pre-dried and usable for foundry industry. The white colour allows their use in aesthetically demanding applications such as decorative plasters and wall paints.

Application

THERMO-SPHERES® W are used in bright applications which require the use of the smallest possible microspheres or make high demands on surface quality. This includes applications in addition to the use in paints and coatings, surfaces as well as special casting compounds and adhesives where a high whiteness is advantageous.

ProductsParticle size
[μm]
Bulk
density
[kg/m³]
Crush
strength
[MPa]
Temperature
max.
[°C]
THERMO-SPHERES® W1000 - 100400251,600
THERMO-SPHERES® W1250 - 125400251,600

The stated values correspond to typical values and hence do not represent a specification.

thermo-spheres®,-white.pdf

OMEGA-BUBBLES® C - ultra white

OMEGA-BUBBLES® C are multicellular expanded glass granules. The high whiteness can help to reduce the addition of titanium dioxide in cementitious formulation. For aesthetic applications like acoustic construction or ceilings the ultra-white lightweight fillers meet today's spirit of time. OMEGA-BUBBLES® C being based on selected recycled glass. Using these products is sustainable and environmentally friendly and can reduces your green CO2 footprint in later disposal issues.

OMEGA-BUBBLES® C are available in the grain sizes customary on the market for the construction and insulation industry.

ProductsParticle size
range [mm]
Grain gross
density [kg/m³]
Bulk density
[kg/m³]
OMEGA-BUBBLES® C-XS0,1 - 0,3680 - 920340 - 460
OMEGA-BUBBLES® C-S0,25 - 0,5460 - 620255 - 345
OMEGA-BUBBLES® C-M0,5 - 1,0380 - 510210 - 290
OMEGA-BUBBLES® C-L1,0 - 2,0310 - 420190 - 250
OMEGA-BUBBLES® C-XL2,0 - 4,0260 - 360160 - 220

The stated values correspond to typical values and hence do not represent a specification.

omega-bubbles®-c---ultra-white.pdf

LITHO-BUBBLES®

Description

LITHO-BUBBLES® are silicate based mineral granules. They are multicellular, open celled foam granulate which has many different uses as lightweight filler.

Application

LITHO-BUBBLES® are used as lightweight filler in aqueous, solvent-containing and solvent-free systems such as paints and coatings, refractory and foundry products, mould making, grinding agents or construction chemical products.

ProductsParticle size
distribution [μm]
Bulk density
[kg/m³]
LITHO-BUBBLES® 400 - 40650
LITHO-BUBBLES® 10040 - 100470
LITHO-BUBBLES® 300100 - 300340
LITHO-BUBBLES® 600300 - 600390

The stated values correspond to typical values and hence do not represent a specification.

litho-bubbles®.pdf

LITHO-BUBBLES®, hydrophobic

Description

LITHO-BUBBLES® H is a hydrophobic mineral granule, multi-cellular, open-celled foam granulate which has many different uses as lightweight filler.

Application

LITHO-BUBBLES® are preferentially used as lightweight filler in aqueous but also in solvent-containing and solvent-free systems such as paints and coatings, refractory and foundry products, mould making, grinding agents or construction chemical products. Sometimes customer wish a hydrophobic treatment for special use in cement base systems for building and construction.

ProductsParticle size
distribution [μm]
Bulk density
[kg/m³]
LITHO-BUBBLES® 100H40 - 100470
LITHO-BUBBLES® 300H100 - 300340
LITHO-BUBBLES® 600H300 - 600390
LITHO-BUBBLES® 1000H500 - 1000330

The stated values correspond to typical values and hence do not represent a specification.

litho-bubbles®,-hydrophobic.pdf

OMEGA-SIL®

Description

OMEGA-SIL® are solid aluminium silicate spheres which have a very high compressive strength. The OMEGA-SIL® SPECIAL* product range consists of aluminium silicates that are processed in an additional processing step sifted. This particularly sharp separation of the top cut results in aesthetic applications to smoother surfaces.

Application

Due to the lower specific surface the use of OMEGA-SIL® in paints and coatings allows a higher degree of filling. OMEGA- SIL® shows in cementitious systems pozzolanic reactivity. The inside microcrystalline structure results in a significant increase of mechanical strength.

ProductsD50
[μm]
D95
[μm]
Effective density
[g/cm³]
Bulk density
[kg/m³]
OMEGA-SIL® XS3.59.52.51780
OMEGA-SIL® S4.511.52.48800
OMEGA-SIL® M6.530.02.40870
OMEGA-SIL® L12.575.02.39880
OMEGA-SIL® XL50.0200.02.251,090
OMEGA-SIL® XS SPECIAL3.59.5*2.51780
OMEGA-SIL® S SPECIAL4.511.5*2.48800
OMEGA-SIL® M SPECIAL6.530.0*2.40870

Product items shown with an asterisk * describe top cut (d98) modified versions for aesthetical surfaces.
The stated values correspond to typical values and hence do not represent a specification.

omega-sil®.pdf
GRADECOLORPARTICLE SIZE
µm
DENSITY
g/cm3
PRESSURE RESISTANCE
mPa
H20White0,200,18-0,233
H25White0,250,23-0,285
H32White0,320,30-0,3514
H40White0,400,38-0,4328
H46White0,460,44-0,4841
H60White0,600,58-0,6355
H60SWhite0,600,58-0,6369

The stated values correspond to typical values and hence do not represent a specification.

hollow-glass-microspheres.pdf

Glitter
Fumed silica
Benzoine
Muscovite and phlogopite mica
Acrylic resins (in solvent)
Anti-foam
Adhesion promoters / Silanes
Hydrocarbon resins for thermoplastic paints
Inorganic flame retardants
Hollow glass microspheres for anti-condensation paints
Soy Lecithin

Construction Chemicals

LUVOGEL® - Inorganic rheology additives for solvent-based and water-based systems

Naturally occurring and organically modified phyllosilicates from the LUVOGEL® series are used in water-based and solvent-based systems for rheology control. The powdered additives are incorporated directly at the beginning of the dispersing process or in form of pre-gels. Polar chemical activators are sometimes added to increase gel formation in solvent-based systems. Easily dispersible and self-activating LUVOGEL® additives enable fast and successful activation processes without the necessity to control the temperature.

ProductsDescriptionApplication
LUVOGEL® 4

Montmorillonite, organically modified

LUVOGEL® 4 is used as an anti-settling and sag-control agent in low to medium polar formulations such as industrial coatings, do-it-yourself-coatings, construction paints, primers, printing inks, adhesives and putties. The addition of a polar activator is recommended.
LUVOGEL® 4 BMontmorillonite, organically modifiedCompare LUVOGEL® 4 – LUVOGEL® 4B contains higher amount of organic component.
LUVOGEL® 7
 

Montmorillonite, organically modified

LUVOGEL® 7 is used as an anti-settling and sag-control agent in low to medium polar formulations such as industrial coatings, do-it-yourself-coatings, construction paints, primers and  printing inks. The addition of a polar activator is recommended.
LUVOGEL® SA 1

Montmorillonite, organically modified

LUVOGEL® SA1 is used as a self-activating anti-settling agent and rheology additive in solvent-based formulations of a wide polarity range, e.g. in industrial coatings, DIY paints, architectural paints, primers or printing inks.
LUVOGEL® SA 10

Montmorillonite, organically modified

LUVOGEL® SA10 is used as an anti-settling and sag-control agent in low polar aliphatic formulations.
LUVOGEL® EDMontmorillonite, organically modifiedLUVOGEL® ED creates a shear thinning flow profile with thixotropic properties and a slight viscosity increase in formulations.
LUVOGEL® G58

Layered silicate, organically modified

LUVOGEL® G58 is mainly used as a rheological and anti-settle additive in unsaturated polyester resins, epoxy resins and vinyl esters, especially in styrene-containing and solvent-containing formulations of different polarity, but also in solvent-free epoxy resin systems.
LUVOGEL® W1Montmorillonite

 

LUVOGEL® W1 is used in water-based formulations, e.g. adhesives, paints and coatings, cleaning agents, polishes, etc. It produces a pseudoplastic flow profile with thixotropic properties and improves settling behavior and flow control.
LUVOGEL® W3Montmorillonite

 

LUVOGEL® W3 is used in water-based formulations, e.g. adhesives, paints and coatings, cleaning agents, polishes, etc. It produces a pseudoplastic flow profile with thixotropic properties and improves settling behavior and flow control.
LUVOGEL® AQSynthetic HectoriteLUVOGEL® AQ is mainly used as a rheological additive in water-based formulations. The main areas of application are industrial coatings and automotive paints – OEM as well as After-Market. The products provide excellent stabilisation and orientation of effect pigments.
LUVOGEL® W2NSynthetic HectoriteLUVOGEL® W2N is mainly used as a rheological additive in water-based formulations. The main areas of application are industrial coatings and automotive paints – OEM as well as After-Market. The products provide excellent stabilisation and orientation of effect pigments.
LUVOGEL® WS1Synthetic HectoriteLUVOGEL® WS1 is a synthetic smectite clay modified by an inorganic sodium phosphate. It is used as a rheological additive in water-based formulations.
LUVOGEL® WS2Synthetic HectoriteLUVOGEL® WS2 is a synthetic smectite clay modified by an inorganic sodium phosphate. It is used as a rheological additive in water-based formulations.
luvogel®---inorganic-rheology-additives-for-solvent-based-and-water-based-systems.pdf

WOLLATROP® - Inorganic rheology additives for water-based systems

WOLLATROP® are hydrated and inverted ribbon silicates that are used as inorganic thickeners in water-based systems. The additives are particularly easy to incorporate into formulations thanks to their filamentous and flexible structure. Unlike classic phyllosilicates, WOLLATROP® products develop a stable structure immediately after incorporation, which leads to increased viscosity, especially in the low shear rate range. WOLLATROP® products are characterized by a high tolerance to changes in ionic strength and pH fluctuations.

ProductDescriptionApplication
WOLLATROP®-SRibbon silicates with fine fiber distributionPreferred use in paints, varnishes and coatings.
WOLLATROP®-SERibbon silicates with fine fiber distributionPreferred use in paints, varnishes and coatings.
WOLLATROP®-MAbsorbent filler based on ribbon silicatesApplication as rheology additive in construction chemical products such as mortars, construction and tile adhesives, fillers and filling compounds, but also high build coatings and wall or facade paints. Particularly suitable for use at high temperature.
WOLLATROP®-LVSilicate fibers, organically modifiedPreferred use in water-based coatings with low to medium layer thickness as well as in construction chemical products, such as adhesives or plasters.
WOLLATROP®-S/240Silicate hybridWOLLATROP®-S/240 is an economical rheology additive. It can be used as a multifunctional rheology additive in construction chemical products or high build coatings that require micro-reinforcement or crack bridging in addition to rheological adjustment.
wollatrop®-inorganic-rheology-additives-for-water-based-systems.pdf

• Polyurethane and epoxy resins (CONIPUR and COINFLOOR)
• EPDM virgin granules (GEZOFLEX)
 
Applications:
 
Sports flooring for indoor and outdoor

• Athletics tracks
• Multifunctional slopes
• Trails for jogging
• Sports and multi-purpose indoor flooring
• Floor coatings for tennis Courts

Flooring for game parks / anti-shock
 
Functional flooring:

• Decorative
• Industrial
• Parking
• Waterproof

Organic and inorganic rheology modifiers
Fumed silica
Mineral fillers, granular, multi-cellular
Polysaccharide based resins
Multicellular lightweight fillers
Inorganic flame retardants
Magnesium silicate
Magnesium carbonate
Calcium silicate
Ceramic microspheres
Multicellular glass microspheres
Aqueous vinyl acetate and vinyl versatate dispersions
Aqueous dispersion of styrene-acrylic
Wollastonite
Mica
Polyvinylacetate co-polymers

 

Learn more about the Surface Technology business unit of Lehmann&Voss&Co.: oberflaeche.lehvoss.net